INFORMATION

iCP12 - usbStick (USB DAQ, PC Oscilloscope, Data Logger, Frequency Generator, PIC18F2550 IO Board)

Print
View full size

usbStick is a mini size 28 Pin USB PIC IO Board with 13x input, output, analog, pwm pins. Great tool for signals monitoring (as oscilloscope), data acquisition and circuit troubleshooting at 1mSec/Samples period.

More details

Currently 0.00/5

Rating: 0.0/5 (0 votes cast)

More info

usbStick is built with a simple set of external ports connection that fulfilled any type connector. With these IO ports, user can easily plug in different type of IO modules with direct conntection to USB port.

The features of iCP12 are listed as followings:

Mini size, easy interfacing, high performance and user friendly device
Used with PIC18F2550 28-Pin Flash USB PIC MCU
Excellent flexibility that allows user to expand the board with plug and play modules

Peripheral Features:

13x IO Port (6x 10bit ADC pins, 2x 10 bit PWM/Freq/DAC pins)
Serial port emulation (UART Baud Rates: 300 bps to 115.2 kbps)
Maximum Voltage: 5Vdc
100mA current output at VDD pin with over-current protection
20MHz oscillator
Green LED - power on indicator
2x LEDs (Green, Red) - status indicator
ICSP Connector - on-board PIC programming
Switch Mode Selection - Boot or Normal mode

SmartDAQ v1.3 Features:

Sampling channel: 6x Analogs (10 bits ADC) + 7x Digitals (Input/Output)
Maximum Sampling rate: 1KHz or 1mSec/Samples
Sampling voltage: 0V - 5V (scalable graph) at 5mV Resolution
Sampling period:

mSec: 1, 2, 5, 10, 20, 50, 100, 200, 500
Sec: 1, 2, 5, 10, 20, 30
Min: 1, 2, 5, 10, 20, 30, 60

Trigger Mode: Larger [>], Smaller [<], Positive edge [↑], Negative edge [↓]
Sampling Mode: Continuous, Single
Logging Function:

Save Format: Text, Graphic, Both
Start Time: Normal, Once Trigger, 24-Hour Clock (Auto Run)
End Time: Unlimited, Data Size, 24-Hour Clock (Auto Stop)

Dimension:

Dimension: 7.0cm X 2.3cm X 0.5cm (H)
Standard 1x5 2.54mm Pin Socket for ICSP connection
Standard 4x6 2.54mm Pin Socket for IO Port connection

Remarks:

Overvoltage or overcurrent may damage the MCU. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.

Layout:

Accessories List: (These accessories would be shipped together)

28 Pin PIC: PIC18F2550
Preloaded Firmware: HID Bootloader + iCP12 DAQv1.2 Firmware
iCP12 firmware can be updated using Microchip USB HID Bootloader via USB port
NO programmer is required!

Firmware Upgrade:

First, switch the SW1 to 'A' for bootloader mode and connect it to USB port

Then program the iCP12 with provided firmware (iCP12_xx_Firmware.hex) file

Disconnect the iCP12 and switch back the SW1 to 'B' for normal operation

Photos:

with SmartDAQ v1.3

All 6x ADC signals overlap together into a single line: x1, x2, x5, x10 (Zoom Scale)

Parallel Recording in 'Text & Graphic Form' at 1mSec Sample Rate (0.5 sec/graph)

with 'ioControl'

with 'pwmGenerator '

with 'adcStream'

Video:

SmartDAQ Demo: (with iCP12 usbStick & iCM32 XYZ Axis Accelerometer) Video

Download:

Please share it for more great features:

iCP12v1.0 usbStick: Schematic
iCP12 SmartDAQ Firmware: v1.3.2 [New]
iCP12 Software Pack v1.2 (Serial Driver, Bootloader, Firmware, SmartDAQ v1.3...): zip
HID firmware, ioControl Demo PIC Source Code: contact us
FREE Visual Basic 2008 Express Software: Link
PIC18F2550 Datasheet: pdf
MPLAB IDE 8.40 (93.7MB): zip